Products


  

Art. No.: 10001

Track fixing pins, long
Track fixing pins, long.

For fastening geoLINE and ROCO LINE tracks with roadbed, approx. 500 units per bag.

€ 7,75



   

Art. No.: 42267

Track bumper construction kit
Track bumper construction kit.

Optionally with wood plank or bumpers.
For all gauge H0 track systems.

Content: 1 piece.

€ 4,40



   

Art. No.: 42506

Straight section G4
Straight track G4 with bedding.
Length 920 mm (4x standard length).

€ 13,90



   

Art. No.: 42508

Curved track R2¼, 7.5°
Curved track R2¼ with bedding.
Radius 358 mm, arc angle 7.5°.

€ 3,10



   

Art. No.: 42509

Curved track R3¼, 7.5°
Curved track R3¼ with bedding.
Radius 419.6 mm, arc angle 7.5°.

€ 3,10



   

Art. No.: 42510

Straight track G1
Straight track G1 with bedding.
Length 230 mm (standard length).

€ 4,10



   

Art. No.: 42511

Straight track DG1
Straight track DG1, diagonal straight element, with bedding.
Length 119 mm.

The diagonal straight track makes the extension of the distance between the parallel tracks possible but the rail siding still remains on the grid line.

€ 3,10



   

Art. No.: 42512

Straight track G½
Straight track G½ with bedding.
Length 115 mm (half standard length).

€ 3,10



   

Art. No.: 42513

Straight track G¼
Straight track G¼ with bedding.
Length 57.5 mm (quarter standard length).

€ 3,10



  

Art. No.: 42517

Digital feeder track (G½)
Digital feeder track with bedding.
Length 115 mm (half standard length).

This feeder track is not equipped with interference suppressors for radio interference suppression and therefore only approved for use in digital systems.

€ 9,90



   

Art. No.: 42518

Circuit track (G½)
Circuit track with potential-free switching contact, with bedding.
Length 115 mm (half standard length).

■ Triggers a switching pulse while travelling with axles having a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions.
■ With fault clearance to avoid switching spikes.
■ With bumper protection
■ Can also be used as a response instantaneous contact along with a response module or detector 10808.

€ 13,50



   

Art. No.: 42519

Electric uncoupler track (G½)
Electric uncoupler track with bedding.
Length 115 mm (half standard length).

The electromagnetic drive is completely hidden inside the roadbed.

€ 23,90



  

Art. No.: 42521

Feeder track (G½)
Feeder track with bedding and EMC interference suppressor.
Length 115 mm (half standard length).

Not suitable for digital operation!

€ 9,80



   

Art. No.: 42522

Curved track R2, 30°
Curved track R2 with bedding.
Radius 358 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 4,10



   

Art. No.: 42523

Curved track R3, 30°
Curved track R3 with bedding.
Radius 419.6 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 4,10



   

Art. No.: 42524

Curved track R4, 30°
Curved track R4 with bedding.
Radius 481.2 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 4,10



   

Art. No.: 42525

Curved track R5, 30°
Curved track R5 with bedding.
Radius 542.8 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 4,20



   

Art. No.: 42526

Curved track R6, 30°
Curved track R6 with bedding.
Radius 604.4 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 4,20



   

Art. No.: 42527

Curved track R9, 15°
Curved track R9 with bedding.
Radius 826.4 mm, arc angle 15°.

€ 4,20



   

Art. No.: 42528

Curved track R10, 15°
Curved track R10 with bedding.
Radius 888 mm, arc angle 15°.

Opposite curve for 15° turnouts and crossings.

€ 4,20



   

Art. No.: 42530

Curved track R20, 5°
Curved track R20 with bedding.
Radius 1962 mm, arc angle 5°.

Two piece constitute complementary curve for 10° turnouts and crossings.

€ 4,40



   

Art. No.: 42532

Turnout left Wl15
Turnout left hand Wl15 with bedding, manually operated.
Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization.

An 8-mm spacer element (D8) is included for diagonal installation.

Suitable electric turnout drive: 42620 or 42624.

€ 24,90



   

Art. No.: 42533

Turnout right Wr15
Turnout right hand Wr15 with bedding, manually operated.
Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°, with pre-installed polarization.

An 8-mm spacer element (D8) is included for diagonal installation.

Suitable electric turnout drive: 42620 or 42624.

€ 24,90



   

Art. No.: 42538

Turnout left Wl15
Turnout left hand Wl15 with bedding, manually operated.
Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°.

Especially inexpensive version without distancers and without pre­installed polarization.

Suitable electric turnout drive: 42620 or 42624.

€ 23,90



   

Art. No.: 42539

Turnout right Wr15
Turnout right hand Wr15 with bedding, manually operated.
Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°.

Especially inexpensive version without distancers and without pre­installed polarization.

Suitable electric turnout drive: 42620 or 42624.

€ 23,90



   

Art. No.: 42543

Three-way turnout DWW15
Asymmetrical three-way turnout DWW15 with bedding, manually operated.
First divergence to the left, second divergence to the right.
Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius 873.5 mm each, frog angle 10.8°.

To adapt the length a 57.5 mm G¼ straight track element and spacers D12 and D4 are included.

Suitable turnout mechanisms (2 pieces are required): 42620 or 42624.
Please note the operating instructions!

€ 54,90



   

Art. No.: 42546

Single slip turnout EKW15
Single slip turnout EKW15 with bedding, manually operated. Standard design with internal switch rails.
Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm.

For diagonal installation two D4 and one D12 are included.

Suitable turnout mechanisms (2 pieces are required): 42620 or 42624.
Please note the operating instructions!

€ 34,90



   

Art. No.: 42549

Double slip turnout DKW10
Double slip turnout DKW10 with bedding, manually operated. Standard design with internal switch rails.
Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm.

For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.

Suitable turnout mechanisms (2 pieces are required): 42620 or 42624.
Please note the operating instructions!

€ 54,90



   

Art. No.: 42556

Curved turnout left BWI2/3
Curved turnout left hand BWl2/3 with bedding, manually operated.
Radius of main track and branch track 358 mm (R2), arc angle 30°.

Suitable electric turnout drive: 42620 or 42624.

Note:
The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.

€ 30,90



   

Art. No.: 42557

Curved turnout right BWr2/3
Curved turnout right hand BWr2/3 with bedding, manually operated.
Radius of main track and branch track 358 mm (R2), arc angle 30°.

Suitable electric turnout drive: 42620 or 42624.

Note:
The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.

€ 30,90



   

Art. No.: 42558

Curved turnout left BWI2/3
Curved turnout left hand BWl2/3 with bedding, manually operated.
Radius of main track and branch track 358 mm (R2), arc angle 30°.

Especially inexpensive version without pre-installed polarization.

Suitable electric turnout drive: 42620 or 42624.

Note:
The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.

€ 29,90



   

Art. No.: 42559

Curved turnout right BWr2/3
Curved turnout right hand BWr2/3 with bedding, manually operated.
Radius of main track and branch track 358 mm (R2), arc angle 30°.

Especially inexpensive version without pre-installed polarization.

Suitable electric turnout drive: 42620 or 42624.

Note:
The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.

€ 29,90



   

Art. No.: 42568

Curved turnout left BWl9/10
Curved turnout left hand BWl9/10 with bedding, manually operated.
Radius of main track and branch track 826.4 mm (R9), arc angle 30°.

Suitable electric turnout drive: 42620 or 42624.

€ 49,90



   

Art. No.: 42569

Curved turnout right BWr9/10
Curved turnout right hand BWr9/10 with bedding, manually operated.
Radius of main track and branch track 826.4 mm (R9), arc angle 30°.

Suitable electric turnout drive: 42620 or 42624.

€ 49,90



   

Art. No.: 42570

Curved turnout left BWI5/6
Curved turnout left hand BWl5/6 with bedding, manually operated.
Radius of main track and branch track 542.8 mm (R5), arc angle 30°.

Suitable electric turnout drive: 42620 or 42624.

€ 39,90



   

Art. No.: 42571

Curved turnout right BWr5/6
Curved turnout right hand BWr5/6 with bedding, manually operated.
Radius of main track and branch track 542.8 mm (R5), arc angle 30°.

Suitable electric turnout drive: 42620 or 42624.

€ 39,90



   

Art. No.: 42580

Turnout left Wl10
Turnout left hand Wl10 with bedding, manually operated.
Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°.

An 5-mm spacer element (D5) is included for diagonal installation.

Suitable electric turnout drive: 42620 or 42624.

€ 34,90



   

Art. No.: 42581

Turnout right Wr10
Turnout right hand Wr10 with bedding, manually operated.
Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°.

An 5-mm spacer element (D5) is included for diagonal installation.

Suitable electric turnout drive: 42620 or 42624.

€ 34,90



   

Art. No.: 42591

Single slip turnout EKW10
Single slip turnout EKW10 with bedding, manually operated. Standard design with internal switch rails.
Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm.

For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.

Suitable turnout mechanisms (2 pieces are required): 42620 or 42624.
Please note the operating instructions!

€ 54,90



   

Art. No.: 42594

Double slip turnout DKW15
Double slip turnout DKW15 with bedding, manually operated. Design “Baeseler” with closure blades located at the outside.
Length 230 mm (standard length), crossing angle 15°, effective branch radius 1050 mm.

For diagonal installation two D4 and one D 12 are included.

Owing to the geometrical characteristics of this type of double slip turnout it is necessary to always use it polarized.

Suitable turnout mechanisms (2 pieces are required): 42620 or 42624.
Please note the operating instructions!

€ 54,90



   

Art. No.: 42597

Crossing K15
Crossing K15 with bedding.
Length 230 mm (standard length), crossing angle 15°.

The railroad lines that cross each other are not electrically isolated.

By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking.

Two D4 and one D12 are included for diagonal installation.

€ 29,90



   

Art. No.: 42598

Centrepiece for double crossover DGV15
Centrepiece for double crossover DGV15 with bedding.
Length 115 mm, crossing angle 30°.

Suitable in combination with 15° turnouts/diamond crossings with slips.

The railroad lines that cross each other are not electrically isolated.

€ 23,90



   

Art. No.: 42610

Rail joiners
Spring steel rail joiners for geoLine and ROCO LINE tracks.

Content: 24 pieces/pack.

€ 3,90



   

Art. No.: 42611

Plastic insulating rail joiners
Plastic insulating rail joiners for ROCO LINE tracks.

Content: 24 pieces/pack.

€ 3,90



   

Art. No.: 42612

Adapter rail clips
Adapter rail clips for rail systems with a 2.5-mm rail profile on the ROCO LINE track.

Content: 24 pieces/pack.

€ 5,90



   

Art. No.: 42613

2-pole connecting cable
2-pole connecting cable with mounted rail clips for ROCO LINE tracks.

This cable has no interference suppressor units (EMC) and may only be used for halting sections in front of signals etc. Please use 42421/42521 as the feeder track.

€ 5,90



   

Art. No.: 42620

Universal bedding switch drive
Universal bedding switch drive. Low switching current consumption, limit switch.

Note please: Like all ROCO switch drives, this drive of course features a limit switch. However, as the adjuster of the drive is held in its end position by the tongue adjustment mechanism of the switch itself (and only then will the limit switch function reliably), please do not try out the switch drive unless it is clip-connected to a switch.

€ 12,90



  

Art. No.: 42624

Digital switch drive
Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly to the rail profiles. The digital switch drive already includes a DCC-Decoder (not RailCom® compatible) and can be programmed after installation.

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 19,90



   

Art. No.: 42650

Substitute embankment slopes
Substitute embankment slopes.
The package contains 6 pieces, each with a length of 360 mm.

€ 13,40



   

Art. No.: 42651

Embankment end piece
Embankment end piece.
These end pieces provide a neat closure of the roadbed at buffer stops, display cases, etc.

The package contains 6 pieces.

€ 7,30



   

Art. No.: 42652

Track ballast
ROCO LINE track ballast.

Matches roadbed track in terms of color and grain. Genuine stone ballast.

€ 6,40



   

Art. No.: 42653

Ballast board
Ballast board to fill in the spaces between the tracks in the train station area. Colour and grain size match the bedding track. 3 pieces/pack.

Size 345 x 93 mm.

€ 13,40



   

Art. No.: 42660

Track bed
Track bed, suitable for 1 off flextrack with wooden sleepers (42400).

€ 13,40



   

Art. No.: 42661

Track bed
Track bed, suitable for 1 off flextrack with concrete sleepers (42401).

€ 13,40



 

Art. No.: 98019

RP-25 frog inserts
Frog inserts for ROCO LINE turnouts of the 10° system + ROCO LINE BW curved turnouts R5 / R6.

€ 56,00



 

Art. No.: 98020

RP-25 Frog inserts
Frog inserts for ROCO LINE turnouts with branch angle of 15°.

€ 56,00