Products


  

Art. No.: 10000

Track fixing pins, short
Track fixing pins, short.

For fastening tracks without roadbed, approx. 400 units per bag.

€ 6,90



   

Art. No.: 10030

Below baseboard mechanism
Below baseboard mechanism.

Can be used for all ROCO rail systems.
Low energy consumption, shut off mechanism, 4 single-pole double-throw switches.

Can also be installed horizontally.

Dimensions approx. 60 x 27 x 45 mm.

€ 41,90



  

Art. No.: 40292

H0 general purpose beneath board uncoupler
H0 general purpose beneath board uncoupler.

Suitable for later mounting for all two-rail DC track systems.

Size of the propulsion unit: (LxWxH) approx. 80 x 40 x 15 mm.

€ 19,90



   

Art. No.: 40293

Below baseboard set of lanterns
Illuminated turnout lantern, to match general purpose below baseboard propulsionmechanism 10030 (optionally DB or SBB) and coupled 90° rotation.

€ 18,40



   

Art. No.: 40295

Electric turnout mechanism left
Electric turnout mechanism left for ROCO LINE turnouts without roadbed.

€ 28,90



   

Art. No.: 40296

Electric turnout mechanism right
Electric turnout mechanism right for ROCO LINE turnouts without roadbed.

€ 28,90



   

Art. No.: 40297

Manual turnout mechanism left
Manual turnout mechanism left for ROCO LINE turnouts without roadbed.

€ 8,90



   

Art. No.: 40298

Manual turnout mechanism right
Manual turnout mechanism right for ROCO LINE turnouts without roadbed.

€ 8,90



  

Art. No.: 42256

Magnets
Magnets to trigger the 42605 and 61193 sleeper.
Very small construction, therefore can easily be mounted beneath any vehicle.

Content: 6 pieces/package.

€ 13,90



   

Art. No.: 42267

Track bumper construction kit
Track bumper construction kit.

Optionally with wood plank or bumpers.
For all gauge H0 track systems.

Content: 1 piece.

€ 4,40



   

Art. No.: 42400

Flex track F4 with wooden sleepers
Flex track F4 with wooden sleepers.
Length 920 mm.

Please note: Each FlexTrack requires a track end piece on only one side.

Laying tips:
Flexible tracks can be bent to form curves of any radius down to R2 = 358 mm. In view of the fact that the two rails will differ in length depending on the radius, it is necessary to cut them to length (Roco 10900 craft saw).
For laying the flex tracks you need track nails, rail connectors and sleeper end pieces. The latter contain the necessary cut-outs in the region of the rail fastenings and make it easier to join flex tracks to one another. The flex track rails are cut to length, then the last three sleepers are cut off the track and the sleeper end piece are pushed onto the rail profiles of the flex track to replace the last three sleepers.

€ 6,90



   

Art. No.: 42401

Flex track F4 with concrete sleepers
Flex track F4 with concrete sleepers.
Length 920 mm.

Please note: Each FlexTrack requires a track end piece on only one side.

Laying tips:
Flexible tracks can be bent to form curves of any radius down to R2 = 358 mm. In view of the fact that the two rails will differ in length depending on the radius, it is necessary to cut them to length (Roco 10900 craft saw).
For laying the flex tracks you need track nails, rail connectors and sleeper end pieces. The latter contain the necessary cut-outs in the region of the rail fastenings and make it easier to join flex tracks to one another. The flex track rails are cut to length, then the last three sleepers are cut off the track and the sleeper end piece are pushed onto the rail profiles of the flex track to replace the last three sleepers.

€ 6,90



   

Art. No.: 42406

Straight track G4
Straight track G4.
Length 920 mm (4x standard length).

€ 8,90



   

Art. No.: 42408

Curved track R2¼, 7.5°
Curved track R2¼.
Radius 358 mm, arc angle 7.5°.

€ 2,50



   

Art. No.: 42409

Curved track R3¼, 7.5°
Curved track R3¼.
Radius 419.6 mm, arc angle 7.5°.

€ 2,50



   

Art. No.: 42410

Straight track G1
Straight track G1.
Length 230 mm (standard length).

€ 2,10



   

Art. No.: 42411

Straight track DG1
Straight track DG1, diagonal straight element.
Length 119 mm.

The diagonal straight track makes the extension of the distance between the parallel tracks possible but the rail siding still remains on the grid line.

€ 2,10



   

Art. No.: 42412

Straight track G½
Straight track G½.
Length 115 mm (half standard length).

€ 2,10



   

Art. No.: 42413

Straight track G¼
Straight track G¼.
Length 57.5 mm.

€ 2,70



   

Art. No.: 42419

Electric uncoupler track (G½)
Electric uncoupler track.
Length 115 mm (half standard length).

€ 20,40



   

Art. No.: 42421

Feeder track (G½)
Feeder track, for analogue operation. With EMC intereference suppression unit.
Length 115 mm (half standard length).

Not suitable for digital operation!

€ 10,40



   

Art. No.: 42422

Curved track R2, 30°
Curved track R2.
Radius 358 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 2,30



   

Art. No.: 42423

Curved track R3, 30°
Curved track R3.
Radius 419.6 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 2,30



   

Art. No.: 42424

Curved track R4, 30°
Curved track R4.
Radius 481.2 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 2,70



   

Art. No.: 42425

Curved track R5, 30°
Curved track R5.
Radius 542.8 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 2,70



   

Art. No.: 42426

Curved track R6, 30°
Curved track R6.
Radius 604.4 mm, arc angle 30°.

12 pieces are needed to form a full circle.

€ 3,30



   

Art. No.: 42427

Curved track R9, 15°
Curved track R9.
Radius 826.4 mm, arc angle 15°.

€ 3,30



   

Art. No.: 42428

Curved track R10, 15°
Curved track R10.
Radius 888 mm, arc angle 15°.

Opposite curve for 15° turnouts and crossings.

€ 3,30



   

Art. No.: 42430

Curved track R20, 5°
Curved track R20.
Radius 1962 mm, arc angle 5°.

Two piece constitute complementary curve for 10° turnouts and crossings.

€ 3,30



   

Art. No.: 42440

Turnout left Wl15
Turnout left hand Wl15, without turnout mechanism.
Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°.

An 8-mm spacer element (D8) is included for diagonal installation.

Suitable turnout mechanisms: 40295, 40297 or 10030.

€ 24,90



   

Art. No.: 42441

Turnout right Wr15
Turnout right hand Wr15, without turnout mechanism.
Length 230 mm (standard length), branch angle 15°, branch radius 873.5 mm, frog angle 10.8°.

An 8-mm spacer element (D8) is included for diagonal installation.

Suitable turnout mechanisms: 40296, 40298 or 10030.

€ 24,90



   

Art. No.: 42448

Single slip turnout EKW15
Single slip turnout EKW15, without turnout mechanisms. Standard design with internal switch rails.
Length 230 mm (standard length), crossing angle 15°, branch radius 531 mm.

For diagonal installation two D4 and one D12 are included.

Suitable turnout mechanisms (2 pieces are required):
40295 (electric turnout mechanism left)
or 40297 (manual turnout mechanism left)
or 10030 (below baseboard mechanism).

€ 45,90



   

Art. No.: 42451

Double slip turnout DKW15
Double slip turnout DKW15, without turnout mechanisms. Design “Baeseler” with closure blades located at the outside.
Length 230 mm (standard length), crossing angle 15°, effective branch radius 1050 mm.

For diagonal installation two D4 and one D 12 are included.

Owing to the geometrical characteristics of this type of double slip turnout it is necessary to always use it polarized.

Suitable turnout mechanisms (2 pieces are required):
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

€ 49,90



   

Art. No.: 42454

Three-way turnout DWW15
Asymmetrical three-way turnout DWW15 without turnout mechanisms. First divergence to the left, second divergence to the right.
Length 287.5 mm (= G1 + G¼), branch angle 15° each, branch radius 873.5 mm each, frog angle 10.8°.

To adapt the length a 57.5 mm G¼ straight track element and spacers D12 and D4 are included.

Suitable turnout mechanisms (2 pieces are required):
40296 (electric turnout mechanism right)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

€ 49,90



   

Art. No.: 42464

Curved turnout left BWl2/3
Curved turnout left hand BWl2/3, without turnout mechanism.
Radius of main track and branch track 358 mm (R2), arc angle 30°.

Suitable turnout mechanism:
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

Note:
The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.

€ 26,90



   

Art. No.: 42465

Curved turnout right BWr2/3
Curved turnout right hand BWr2/3, without turnout mechanism.
Radius of main track and branch track 358 mm (R2), arc angle 30°.

Suitable turnout mechanism:
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

Note:
The curved turnouts R2/R3 are only conditionally suitable for to-scale express coaches with a length-over-buffers exceeding 300 mm because the parallel track separation narrows at the turnout, causing problems if long wagons meet at the turnout.

€ 26,90



   

Art. No.: 42470

Curved turnout left BWl5/6
Curved turnout left hand BWl5/6, without turnout mechanism.
Radius of main track and branch track 542.8 mm (R5), arc angle 30°.

Suitable turnout mechanism:
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

€ 36,90



   

Art. No.: 42471

Curved turnout right BWr5/6
Curved turnout right hand BWr5/6, without turnout mechanism.
Radius of main track and branch track 542.8 mm (R5), arc angle 30°.

Suitable turnout mechanism:
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

€ 36,90



   

Art. No.: 42476

Curved turnout left BWI9/10
Curved turnout left hand BWI9/10, without turnout mechanism.
Radius of main track and branch track 826.4 mm (R9), arc angle 30°.

Suitable turnout mechanism:
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

€ 46,90



   

Art. No.: 42477

Curved turnout right BWr9/10
Curved turnout right hand BWr9/10, without turnout mechanism.
Radius of main track and branch track 826.4 mm (R9), arc angle 30°.

Suitable turnout mechanism:
40295 or 40296 (electric turnout mechanism),
40297 or 40298 (manual turnout mechanism)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

€ 46,90



   

Art. No.: 42488

Turnout left Wl10
Turnout left hand Wl10, without turnout mechanism.
Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°.

An 5-mm spacer element (D5) is included for diagonal installation.

Suitable turnout mechanisms: 40295, 40297 or 10030.

€ 29,90



   

Art. No.: 42489

Turnout right Wr10
Turnout right hand Wr10, without turnout mechanism.
Length 345 mm (= G1 + G½), branch angle 10°, branch radius 1946 mm, frog angle 8.1°.

An 5-mm spacer element (D5) is included for diagonal installation.

Suitable turnout mechanisms: 40296, 40298 or 10030.

€ 29,90



   

Art. No.: 42493

Single slip turnout EKW10
Single slip turnout EKW10, without turnout mechanisms. Standard design with internal switch rails.
Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm.

For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.

Suitable turnout mechanisms (2 pieces are required):
40295 (electric turnout mechanism left)
or 40297 (manual turnout mechanism left)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

€ 45,90



   

Art. No.: 42496

Double slip turnout DKW10
Double slip turnout DKW10, without turnout mechanisms. Standard design with internal switch rails.
Length 345 mm (= G1 + G½), crossing angle 10°, branch radius 959 mm.

For installation crossing from left or right two 2.5 mm spacers (D2) are included. An 8 mm spacer element (D8) is included for combining with diagonally installed 10° turnouts.

Suitable turnout mechanisms (2 pieces are required):
40295 (electric turnout mechanism left)
or 40297 (manual turnout mechanism left)
or 10030 (below baseboard mechanism).
Please note the operating instructions!

€ 49,90



   

Art. No.: 42497

Crossing K15
Crossing K15.
Length 230 mm (standard length), crossing angle 15°.

The railroad lines that cross each other are not electrically isolated.

By using a 10019 relay it is possible to polarize the frogs and incoporate the crossing like a normal solenoid accessory in a route locking.

Two D4 and one D12 are included for diagonal installation.

€ 27,90



   

Art. No.: 42498

Crossing K30
Crossing K30.
Length of tracks 119 mm (= DG1). Crossing angle 30°.

The railroad lines that cross each other are not electrically isolated.

Among other things they are suitable for forming double track connections with the 15° turnouts or double slip turnouts.

€ 18,90



   

Art. No.: 42600

Sleeper end piece
Sleeper end piece to match flex track with wooden sleepers (42400).

€ 4,80



   

Art. No.: 42601

Sleeper end piece
Sleeper end piece to match flex track with concrete sleepers (42401).

€ 4,80



   

Art. No.: 42605

Sleeper ROCO LINE
With built-in reed switch, to be actuated by means of a 42256 magnet.This potential-free switching contact can be installed at any point of atrack layout. The size and colour of the sleeper goes with the ROCO LINE-track, thus camouflaging the contact.

Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.

€ 9,90



   

Art. No.: 42610

Rail joiners
Spring steel rail joiners for geoLine and ROCO LINE tracks.

Content: 24 pieces/pack.

€ 3,90



   

Art. No.: 42611

Plastic insulating rail joiners
Plastic insulating rail joiners for ROCO LINE tracks.

Content: 24 pieces/pack.

€ 3,90



   

Art. No.: 42612

Adapter rail clips
Adapter rail clips for rail systems with a 2.5-mm rail profile on the ROCO LINE track.

Content: 24 pieces/pack.

€ 5,90



   

Art. No.: 42613

2-pole connecting cable
2-pole connecting cable with mounted rail clips for ROCO LINE tracks.

This cable has no interference suppressor units (EMC) and may only be used for halting sections in front of signals etc. Please use 42421/42521 as the feeder track.

€ 5,90



 

Art. No.: 98019

RP-25 frog inserts
Frog inserts for ROCO LINE turnouts of the 10° system + ROCO LINE BW curved turnouts R5 / R6.

€ 56,00



 

Art. No.: 98020

RP-25 Frog inserts
Frog inserts for ROCO LINE turnouts with branch angle of 15°.

€ 56,00