Products


  

Art. No.: 10000

Track nails, short

€ 6,90



  

Art. No.: 10001

Track nails, long

€ 7,40



   

Art. No.: 10030

Below baseboard mechanism
For ROCO LINE among other things: low energy consumption, shut off mechanism, 4 single-pole double-throw switch. Can also be installed horizontally. Dimensions approx. 60 x 27 x 45 mm.

€ 41,90



   

Art. No.: 32200

Flexible track
Flexible track (730 mm).

€ 6,90



   

Art. No.: 32201

Flexible light railway track
Flexible light railway track, length 730 mm.

€ 6,90



   

Art. No.: 32202

Standard straight
H0e track - standard straight,134.3 mm

€ 2,90



   

Art. No.: 32203

H0e track - straight adjustmentsection
H0e track - straight adjustmentsection, 47.9 mm.

€ 2,90



   

Art. No.: 32204

H0e track - standard radius
H0e track - standard radius,261.8 mm, 30°.

€ 2,90



   

Art. No.: 32205

H0e track - adjustment curve
H0e track - adjustment curve,13.1°, radius 493 mm.

€ 2,90



   

Art. No.: 32210

Sleeper end piece
Sleeper end piece, matches H0e track 32200.

€ 0,90



   

Art. No.: 32211

Sleeper end piece
Sleeper end piece, matcheslight railway flex track 32201.

€ 0,90



   

Art. No.: 32401

Light railway turnout, left, with electric motor
Branch angle 24°. Length of the straight track 104.2 mm. Radius of the branch track 194.6 mm.

€ 31,90



   

Art. No.: 32403

Light railway turnout, right, with electric motor
Branch angle 24° Length of the straight track 104.2 mm. Radius of the branch track 194.6 mm.

€ 31,90



   

Art. No.: 32409

H0e turnout left 15°, with metal frog
Suitable electric motor: 32418

€ 21,90



   

Art. No.: 32411

H0e below-baseboard turnout 15°
H0e below-baseboard turnout 15°, metal cross frog Matching electricmechanism, surface mount. 22218 - left, 22219 - right.

€ 21,90



   

Art. No.: 32413

H0e metal rail joiner (fishplate)
H0e metal rail joiner (50 pc./pack).

€ 5,40



   

Art. No.: 32414

H0e isolating rail joiner (fishplate)
H0e isolating rail joiner (24 pc./pack).

€ 3,40



   

Art. No.: 32417

H0e track connecting cable
H0e track connecting cable, without radio suppression.

€ 4,40



   

Art. No.: 32418

H0e / TT left turnout mechanism
Left turnout mechanism, suitable for all H0e turnouts.

Double spool motor with shut-off mechanism. Can be used as replacement as well as for later upgrading of manual/ under-baseboard turnouts.

€ 19,90



   

Art. No.: 32419

H0e / TT right turnout mechanism
Right turnout mechanism, suitable for all H0e turnouts.

Double spool motor with shut-off mechanism. Can be used as replacement as well as for later upgrading of manual/ under-baseboard turnouts.

€ 19,90



   

Art. No.: 35900

TT-electric turntable
Electric turntable for track gauge TT.
Comes with 6 ascent-descent tracks and one turntable switch.
Complementary set: 35901
The maximum possible 24 ascent and descent tracks stand at an angle of 15 degrees to each other. Only the tracks that are connected to the revolving platform are power supplied.
With a revolving platform length of 183 mm.
Suitable for locomotives with a wheel base length up to a 170 mm.

€ 349,00



   

Art. No.: 35901

Complementary set for the TT-turntable 35900
The set consists of 3 ascent/descent tracks. A maximum of 24 tracks can be connected to the turntable.

€ 18,90



  

Art. No.: 40004

Stop blocks / brake shoes H0
Stop blocks / brake shoes, yellow.

For clipping onto the rail. 12 units / pack

€ 7,40



  

Art. No.: 40292

H0 general purpose beneath board uncoupler.

€ 19,90



   

Art. No.: 40293

Below baseboard set of lanterns

€ 18,40



   

Art. No.: 40295

Turnout mechanism
Electric turnout mechanism left for turnouts without roadbed

€ 28,40



   

Art. No.: 40296

Turnout mechanism
Electric turnout mechanism, right for turnouts without roadbed.

€ 28,40



   

Art. No.: 40297

Manual turnout mechanism
Manual turnout mechanism left for Roco-Line turnouts.

€ 8,40



   

Art. No.: 40298

Manual turnout mechanism
Manual turnout mechanism right for Roco-Line.

€ 8,40



  

Art. No.: 42256

Magnets
To trigger the 42605 and 61193 sleeper.
Very small construction, therefore can easily be mounted beneath any vehicle.

Content: 6 pc./pack.

€ 13,90



   

Art. No.: 42262

Sleeper end piece
For flex tracks.

n.N.



   

Art. No.: 42267

Track bumper construction kit.
Track bumper construction kit.

Optionally with wood plank or bumpers. 1 units/pack.

€ 4,40



   

Art. No.: 42400

F4 Flexgleis (flex track) with wooden sleepers
F4 Flexgleis (flex track) with wooden sleepers, length 920mm

€ 6,60



   

Art. No.: 42401

F4 flex track with concrete sleepers
Flex track with concrete sleepers.
Flex tracks can be bent to form curves of any radius down to R2 = 358 mm.

€ 6,60



   

Art. No.: 42406

G4 straight track element
G4 straight track element, length: 920 mm 4x standard length

€ 7,90



   

Art. No.: 42408

R2 curve1/4, r 358 mm l 7,5°

€ 2,40



   

Art. No.: 42409

R3 curve1/4, r 419,6 mml7,5°

€ 2,40



   

Art. No.: 42410

G1 straight track element
G1 straight track element, length: 230 mm, standard length

€ 2,00



   

Art. No.: 42411

DG1 diagonal straighttr. element
DG1 diagonal straight element, length 119mm

€ 2,00



   

Art. No.: 42412

G1/2 straight track element
G1/2 straight track element, length 115 mm

€ 2,00



   

Art. No.: 42413

G1/4 straight trackelement
G1/4 straight track element, length 57.5 mm

€ 2,60



   

Art. No.: 42419

Uncoupler track
Electric uncoupler track. Length: 115mm (G1/2)

€ 19,40



   

Art. No.: 42421

G1/2 feeder track
With EMC intereference suppression unit for analogue operation

€ 9,90



   

Art. No.: 42422

R2 curve, r 358 mm 30°

€ 2,20



   

Art. No.: 42423

R3 curve, r 419,6 mm 30°

€ 2,20



   

Art. No.: 42424

R4 curve, r 481,2 mm 30°

€ 2,60



   

Art. No.: 42425

R5 curve, r 542,8 mm 30°

€ 2,60



   

Art. No.: 42426

R6 curve, r 604,4 mm 30°

€ 3,20



   

Art. No.: 42427

R9 curve, r 826,4 mm 15°

€ 3,20



   

Art. No.: 42428

R10, r 888mm 15° curve

€ 3,20



   

Art. No.: 42430

R20 curve, r 1962mm 5°

€ 3,20



   

Art. No.: 42440

Turnout, left Wl 15
Left turnout, branch angle 15°. Length 230 mm, branch radius 873.5 mm. Frog angle 10,8°.

An 8-mm spacer element (D8) is included for diagonal installation. Suitable mechanisms: 40295, 40297 or 10030

€ 24,90



   

Art. No.: 42441

Wr 15 Turnout, right
Right turnout, branch angle 15°. Length 230 mm, branch radius 873.5 mm. Frog angle 10,8°.

An 8-mm spacer element (D8) is included for diagonal installation. Suitable mechanisms: 40296, 40298 or 10030

€ 24,90



   

Art. No.: 42448

EKW 15 single slip switch
Single slip switch EKW 15°, Roco Line 2,1 mm.

Length 230 mm, standard design with internal switch rails, without mechanism; branch radius 531 mm, crossing angle 15°.

Suitable mechanisms, 2 each x 40295/40297 or 10030. For diagonal installation two D4 and one D12 are included.

€ 45,90



   

Art. No.: 42451

DKW 15 double slip switch
Roco Line double slip switch. Length 230 mm, crossing angle 15°, eff ective branch radius 1050mm.

Owing to the geometrical characteristics of this type of double slip switch it is necessary to always use it polarized. Suitable mechanism- 2 each: 40295 (or 40296), 40297 (or 40298) or 10030. For diagonal installation two D4 and one D 12 are included.

€ 49,90



   

Art. No.: 42454

DWW 15 three-way turnout
Length 287.5 mm (= G1 + G1/4, branch radius 873.5 mm each, branchangle 15° each. To adapt the length a 57.5 mm G1/4 straight track elementand spacers D12 and D4 are included. Suitable electric mechanisms:2x 40296 or 2x 10030.

€ 49,90



   

Art. No.: 42464

R2/R3 curved turnout left
R2/R3 curved turnout left BWl 2/3; radius of main rail and branchtrack 358 mm (R2)/30°. Suitable mechanisms:40295, 40297; 10030.

€ 26,90



   

Art. No.: 42465

R2/R3 curvedturnout
curved turnout , right radius of main rail and branch track 358 mm (R2)/30°. Suitable mechanisms: 40296, 40298; 10030.

€ 26,90



   

Art. No.: 42470

R5/R curved turnout6
BWl 5/6 curved turnout, left;

Radius of mainrail and branch track 542.8 mm.
(R 5)/30°.
Suitable mechanisms: 40295, 40297 or 10030.

€ 36,90



   

Art. No.: 42471

R5/R curved turnout6
BWr 5/6 curved turnout, right.

Radius of mainrail and branch track 542.8 mm (R5)/30°.
Suitable mechanisms: 40296, 40298 or 10030.

€ 36,90



   

Art. No.: 42476

Curved turnout R9/R10
Curved turnout left BWI 9/10

Radius of main rail and branch track 826.4 mm (R9)/30°.

Suitable mechanisms: 40295, 40297 and 10030.

€ 46,90



   

Art. No.: 42477

Curved turnout R9/R10
Curved turnout, right BWr 9/10.

Radius of main rail and branch track 826,4 mm (R2)/30°.

Suitable mechanisms: 40296, 40298 and 10030.

€ 46,90



   

Art. No.: 42488

Turnout left Wl10
Left turnout Wl10 without mechanism. Length 345 mm, branch radius1946 mm, branch angle 10°, frog angle 8.1
A 5-mmspacer element (D5) is included for diagonal installation. Suitable mechanisms: 40295,40297 or 10030.

€ 28,90



   

Art. No.: 42489

Turnout right Wr10
Turnout, right Wr10 without mechanism. Length 345 mm, branch radius1946 mm, branch angle 10°, frog angle 8,1°. A 5-mmspacer element (D5) is included for diagonalinstallation.

Suitable mechanisms: 40296,40298 or 10030.

€ 28,90



   

Art. No.: 42493

EKW 10 single slip switch
Roco Line 2,1 mm single slip switch EKW 10.

Length 345 mm, branch radius 959 mm, branch angle 10°. For installationcrossing from left or right two D2 diagonal 2.5 spacers areincluded. An 8-mm spacer element (D8) is included for combiningwith diagonally installed 10° turnouts.

Suitable mechanisms 2 x each 40295/40297 or 10030.

€ 45,90



   

Art. No.: 42496

DKW 10 double slip switch
Double slip switch DKW 10

Length 345 mm. Internal switch rails, branch radius 959 mm, frog angle 10°. For installation crossing from left or right two spacers, D2 and D8, have been included.

In each case 2 matching mechanismsare required.
Please heed operating instructions: 40295, 40297or 10030.

€ 49,90



   

Art. No.: 42497

K 15 crossing
Roco Line 2,1 mm crossing 15°.

Length 230 mm, crossing angle 15°; by using a 10019 relay it is possibleto polarize the frogs and incoporate the crossing like a normal solenoidaccessory in a route locking.

The railroad lines that cross eachother are not electrically isolated. Two D4 and one D12 are included fordiagonal installation.

€ 26,90



   

Art. No.: 42498

K30 crossing
Roco Line crossing K30.

Length of tracks 119 mm. Crossing angle 30°. The railroad lines that cross one another are not electrically isolated. Among other things they are suitable for forming double track connections with the 15° turnouts or double slip switches.

€ 17,90



   

Art. No.: 42506

Straight section G4
Straight section G4, length 920mm (4x standard length), with bedding.

€ 12,90



   

Art. No.: 42508

Curved track R2 ¼
Curved track R2 ¼ r = 358mm/7.5 deg., with bedding.

€ 3,00



   

Art. No.: 42509

Curved track R3 1/4
Curved track R3 1/4, r = 419.6 mm/7.5 deg., with bedding.

€ 3,00



   

Art. No.: 42510

Straight section G1
Straight section G1, length 230mm (standard length), with bedding.

€ 3,90



   

Art. No.: 42511

Diagonal straight section DG1
Diagonal straight section DG1, length 119mm, with bedding.

€ 3,00



   

Art. No.: 42512

Straight section G½
Straight section G½, length 115mm, with bedding.

€ 3,00



   

Art. No.: 42513

Straight section G¼
Straight section G¼, length 57.5mm, with bedding.

€ 3,00



  

Art. No.: 42517

Digital feeder track
Digital feeder track (G½). This feeder track is not equipped with interference suppressors for radio interference suppression and therefore only approved for use in digital systems.

€ 9,40



   

Art. No.: 42518

Circuit track
Circuit track with potential-free switching contact Length 115mm (G½), with bedding.

■ Triggers a switching pulse while travelling with axles having a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions.
■ With fault clearance to avoid switching spikes.
■ With bumper protection
■ Can also be used as a response instantaneous contact along with a response module or detector 10808.

€ 12,90



   

Art. No.: 42519

Decoupler track
Circuit track with potential-free switching contact. Length 115mm (G½), with bedding.

€ 22,90



  

Art. No.: 42521

Feeder track
Feeder track G½ with EMC interference suppressor. This feeder track is unsuitable for operation in digital systems. With bedding.

€ 9,40



   

Art. No.: 42522

Curved track R2
Curved track R2, r = 358mm/30°, with bedding.

€ 3,90



   

Art. No.: 42523

Curved track R3
Curved track R3, r = 419.6mm/30 deg., with bedding.

€ 3,90



   

Art. No.: 42524

Curved track R4
Curved track R4, r = 542.8mm/30 deg., with bedding.

€ 3,90



   

Art. No.: 42525

Curved track R5
Curved track R5, r = 542.8mm/30 deg., with bedding.

€ 4,00



   

Art. No.: 42526

Curved track R6
Curved track R6, r = 604.4mm/30 deg., with bedding.

€ 4,00



   

Art. No.: 42527

Curved track R9
Curved track R9, r = 826.4mm/15 deg., with bedding.

€ 4,00



   

Art. No.: 42528

Curved track R10
Curved track R10, r = 888mm/15 deg., (reverse curve for 15 deg. switches/crossings), with bedding.

€ 4,00



   

Art. No.: 42530

Curved track R20
Curved track R20, r = 1962mm/5 deg., (2 pieces form the reverse curve for 10 deg. switches/crossings).

€ 4,20



   

Art. No.: 42532

Left switch Wl15
Left switch Wl15, built as Art. No. 42538, but with pre-installed polarization, with bedding. For the installation of diagonals, an 8mm distancer (D8) is enclosed. Matching electric drive: 42620 or 42624.

€ 24,90



   

Art. No.: 42533

Right switch Wr15
Right switch Wr15, built as Art. No. 42532, with bedding.

€ 24,90



   

Art. No.: 42538

Left switch Wl15
Left switch Wl15, length 230mm, Turnout radius 873.5mm, turnout angle 15 deg. Manual operation, with bedding.
Matching electric drive: 42620 or 42624. Especially inexpensive version without distancers and without pre­installed polarization.

€ 22,90



   

Art. No.: 42539

Right switch Wr15
Right switch Wr15, built as Art. No. 42538, with bedding.

€ 22,90



   

Art. No.: 42543

Three-way switch 15° - frog angle 10.8°
Three-way switch DWW 15; first turnout: left, second turnout: right, length 287.5mm (G1+G¼), both turnout radii 873.5mm, turnout radius 15 deg. each; a straight track section G¼ plus distancers D4 and D12 are enclosed for length compensation. Matching electric drive: 42620 or 42624 (2x each), with bedding.

€ 54,00



   

Art. No.: 42546

Simple diamond crossing with slips 15°
Simple diamond crossing EKW 15, length 230mm, „English“ design,
with inside tongues. Turnout radius 531mm, turnout angle 15 deg.
For installation of diagonals, two off D4 and one off D12 are
enclosed.With bedding.

€ 34,90



   

Art. No.: 42549

Double-slip switch 10°
Double-slip switch DKW 10, „English“ design with inside tongues and manual operation, length 345mm. Frog angle 10 deg., turnout radius 959mm. With bedding. Two distancers D2 and D8 are enclosed for length compensation.Matching electric drive: 42620 (2x) or 42624 (2x).

€ 54,00



   

Art. No.: 42556

Curved turnout left BWI 2/3
Curved turnout left BWI 2/3 for manual operation. Radius of the main track and the branch track 358mm (R2)/30 deg. With bedding. Matching electric drive:
42620 or 42624.

The use of the curved turnout R2/R3 for long ‚to-scale‘ express train coaches (length over buffers more than 300mm) is inconvenient because the parallel distance in the area of the counterswitch is geometrically slightly reduced, therefore two wagons approaching each other with a length over buffers of more than 300mm will not be able to pass each other properly.

€ 30,90



   

Art. No.: 42557

Curved turnout right BWr 2/3
Curved turnout right BWr 2/3 for manual operation. Radius of the main track and the branch track 358mm (R2)/30 deg. With bedding. Matching electric drive:
42620 or 42624.

The use of the curved turnout R2/R3 for long ‚to-scale‘ express train coaches (length over buffers more than 300mm) is inconvenient because the parallel distance in the area of the counterswitch is geometrically slightly reduced, therefore two wagons approaching each other with a length over buffers of more than 300mm will not be able to pass each other properly.

€ 30,90



   

Art. No.: 42558

Curved turnout left BWI 2/3
Curved turnout left BWI 2/3 for manual operation. With bedding. Matching electric drive: 42620 or 42624. Especially inexpensive version without pre-installed polarization.

The use of the curved turnout R2/R3 for long ‚to-scale‘ express train coaches (length over buffers more than 300mm) is inconvenient because the parallel distance in the area of the counterswitch is geometrically slightly reduced, therefore two wagons approaching each other with a length over buffers of more than 300mm will not be able to pass each other properly.

€ 28,90



   

Art. No.: 42559

Curved turnout right BWr 2/3
Curved turnout right BWr 2/3 for manual operation. With bedding. Matching electric drive: 42620 or 42624. Especially inexpensive version without pre-installed polarization. Without illustration.

The use of the curved turnout R2/R3 for long ‚to-scale‘ express train coaches (length over buffers more than 300mm) is inconvenient because the parallel distance in the area of the counterswitch is geometrically slightly reduced, therefore two wagons approaching each other with a length over buffers of more than 300mm will not be able to pass each other properly.

€ 28,90



   

Art. No.: 42568

Curved turnout left BWl 9/10
Curved turnout left BWl 9/10 for manual operation, radius of the main track and the branch track 826.4mm (R9)/30 deg.

Matching electric drive 42620 or 42624.

€ 49,90



   

Art. No.: 42569

Curved turnout right BWr 9/10
Curved turnout right BWr 9/10 for manual operation, radius of the main track and the branch track 826.4mm (R9)/30 deg.

Matching electric drive 42620 or 42624.

€ 49,90



   

Art. No.: 42570

Curved turnout left BWI 5/6
Curved turnout left BWI 5/6 for manual operation. Radius of the main track and the branch track 542.8mm (R5)/30 deg. With bedding. Matching electric drive: 42620 or 42624.

€ 39,90



   

Art. No.: 42571

Curved turnout right BWr 5/6
Curved turnout right BWr 5/6 for manual operation. Radius of the main track and the branch track 542.8 mm (R5)/30 deg. With bedding. Matching electric drive: 42620 or 42624.

€ 39,90



   

Art. No.: 42580

Left switch Wl 10 - frog angle 8.1°
Left switch Wl 10 for manual operation, length 345mm, turnout radius 1946mm, with bedding.For the installation of diagonals, a
5mm distancer (D5) is enclosed. Matching electric drive: 42620 or 42624.

€ 34,90



   

Art. No.: 42581

Right switch Wr 10 - frog angle 8.1°
Right switch Wr 10 for manual operation, built as Art. No. 42580, with bedding. Matching electric drive: 42620 or 42624.

€ 34,90



   

Art. No.: 42591

Simple diamond crossing with slips 10°
Simple diamond crossing with slips 10 deg., „English“ design with inside tongues, for manual operation, length 345mm,turnout radius 959mm, crossing angle 10 deg. With bedding. Two distancers D2 and D8 are enclosed for length compensation. Matching electric drive 42620 (2x) or 42624 (2x).

€ 54,00



   

Art. No.: 42594

Double-slip switch 15°
Double-slip switch DKW 15 version „Baeseler“, with outside tongues. Length 230mm, crossing angle 15 deg., effective turnout radius 1050mm. Polarized ex works due to the electrical requirement of this diamond crossing with slips. For installation of diagonals, two off D4 and one off D12 are enclosed. With bedding. For Art. No. 42546: Matching electric drive 42620 (2x) or 42624 (2x).

€ 54,00



   

Art. No.: 42597

Crossing 15°
Crossing K15, length 230mm, crossing angle 15 deg.; the frogs can be polarized with a 10019 relay, crossing can be integrated in a track protection arrangement like a normal magnetic item. The crossing railway tracks are not electrically separated. For the installation of diagonals, two off D4 and one off D12 are enclosed. With bedding.

€ 29,90



   

Art. No.: 42598

Centrepiece for double crossover
Centre piece for double crossover DGV 15, suitable in combination with 15 deg. switches/diamond crossings with slips. The crossing railway tracks are not electrically separated. Length: 115mm. With bedding.

€ 22,90



   

Art. No.: 42600

Sleeper end piece for flexible track with wooden sleeper

€ 4,60



   

Art. No.: 42601

Sleeper end piece

€ 4,60



   

Art. No.: 42605

Sleeper ROCO LINE
With built-in reed switch, to be actuated by means of a 42256 magnet.This potential-free switching contact can be installed at any point of atrack layout. The size and colour of the sleeper goes with the ROCO LINE-track, thus camouflaging the contact.

Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.

€ 9,90



   

Art. No.: 42606

Rerailer
Rerailer makes it easier to place the vehicles on all tracks (without locomotive and track).

€ 4,90



   

Art. No.: 42608

Buffer stop
Buffer stop

Prototypical stable construction for all track systems.
Incl. 2 brake shoes to clip onto the rail.

€ 5,40



   

Art. No.: 42609

Wheel retracker set

€ 4,90



   

Art. No.: 42610

Rail joiners

€ 3,90



   

Art. No.: 42611

Rail joiners

€ 3,90



   

Art. No.: 42612

Adapter rail clips

€ 5,90



   

Art. No.: 42613

2-pole connecting cable
Two-conductor power supply cable attached to fishplates for ROCO LINE 2.1 mm track.
This cable has no interference suppressor for radio interference units (EMC).

€ 5,90



   

Art. No.: 42615

Turntable

€ 399,00



   

Art. No.: 42616

DC track connections
DC track connections for turntable 42615.

Content: 4 units 2L = track connections, suitable for turntable 42615.

€ 17,90



   

Art. No.: 42617

AC track connections
AC track connectinos for turntable 42615.

3 units 3L ~ track connections, suitable for turntable 42615.

€ 17,90



   

Art. No.: 42620

Universal bedding switch drive
Universal bedding switch drive. Low switching current consumption, limit switch.

Note please: Like all ROCO switch drives, this drive of course features a limit switch. However, as the adjuster of the drive is held in its end position by the tongue adjustment mechanism of the switch itself (and only then will the limit switch function reliably), please do not try out the switch drive unless it is clip-connected to a switch.

€ 12,90



  

Art. No.: 42624

Digital switch drive
Suitable for all ROCO LINE bedding switches. The digital switch drive is simply plugged into the recess on the underside of the switches. The electrical connection is made with two cables directly to the rail profiles. The digital switch drive already includes a DCC-Decoder (not Railcom compatible) and can be programmed after installation.

€ 19,90



   

Art. No.: 42650

Substitute embankment slopes
Substitute embankment slopes. The package contains 6 pieces, each with a length of 360mm.

€ 12,90



   

Art. No.: 42651

Embankment end piece
Embankment end piece. The package contains 6 pieces.

€ 6,90



   

Art. No.: 42652

Track ballast
Roco Line track ballast.

Matches roadbed track in terms of color andgrain. Genuine stone ballast.

€ 6,40



   

Art. No.: 42653

Ballast board
Ballast board to fill in the spaces between the tracks in the train station area. Colour and grain size match the bedding track. 3 pcs/pack. Size 345x93mm.

€ 12,90



   

Art. No.: 42660

Track bed
Track bed, suitable for 1 off flextrack with wooden sleepers (42400).

€ 12,90



   

Art. No.: 42661

Track bed
Track bed, suitable for 1 off flextrack with concrete sleepers (42401).

€ 12,90



   

Art. No.: 51250

Extension track set for Digital Starter Set
Extension track set for Digital Starter Set, Set 1 to build a parallel circle.

Contents: 12 curved tracks R4, 4 straight tracks G200, 8 straight tracks G185, 2 turnouts left and right each equipped with electric motors and turnout decoders, 1 turnout with electrical motor and decoder each to retrofit the starter sets 41501, 41505, 41503, 41502, 41508, 41504.

€ 199,00



   

Art. No.: 61101

Track set B
geoLine track set B.

Content:
13 straight tracks G200 (61110)
 1 manual turnout left (61140)
 1 buffer stop (42608)
 1 roadbed end piece (61180)

Size: approx. 250 x 90 cm.

€ 49,90



   

Art. No.: 61102

Track set C
geoLine track set C

Content:
2 straight tracks G185 (61111)
2 curves R3 (61123)
1 manual uncoupler track (61119)
1 manual curve turnout right (61155)
1 manual turnout right (61141)
1 counter curve (61128)

Size: approx. 230 x 100 cm.

€ 65,00



   

Art. No.: 61103

Track set D
Track set D geoLine.

content:
3 straight tracks G200 (61113), 1 straight track G100 (61123), 1 curve R3 (61123), 10 curves R4 (61124), 2 manual tournouts left (61140), 1 manual curved tounout left (61154), 1 bumper (42608), 1 track end piece, 6 straight tracks G185 (61111). Size: 243 x 106 cm.

€ 114,00



   

Art. No.: 61104

Track set E
Track set E geoLine

contents:
1 manual uncoupler track (61119), 2 straight tracks G100 (61113), 1 straight track G100 (61110), 2 manual tournouts left (61140), 2 manual tournouts right (61141), 2 bumpers (42608), 2 track end beds; Size: 243 x 106 cm

€ 94,00



   

Art. No.: 61106

Flexible track G800
Flexible track G800, length 800 mm. To equalise differences in length, use set of sleeper end pieces 61183.

€ 15,40



   

Art. No.: 61110

Straight track G200
Straight track G200
Length 200 mm (standard length)

€ 2,60



   

Art. No.: 61111

Straight track G185
Straight track G185,
Length: 185 mm

Adapter track for straight turnouts, threeway-turnout and double-slip.

€ 2,80



   

Art. No.: 61112

Adapter straight track G76.5
Adapter straight track G76.5,
Length 76.5 mm

€ 2,70



   

Art. No.: 61113

Straight track G100
Straight track G100,
Length: 100 mm (half standard length)

€ 2,60



   

Art. No.: 61117

geoLine switching track
Switching track with potential-free switch contact, length 100 mm.

■ Triggers a switching pulse while running axles with a wheel flange height of 1.1 mm (ROCO standard). Using wheel flanges with a varying height can result in malfunctions.
■ With fault clearance to avoid switching spikes.
■ With buffer protection
■ Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.

€ 21,90



   

Art. No.: 61118

Electric uncoupler track
Electric uncoupler track, length: 100 mm, with electric motor.
Digitally switchable with uncoupler decoder 61197.

€ 27,90



   

Art. No.: 61119

Manual uncoupler track G100
Manual uncoupler track G100

Length: 100 mm. Cannot be retrofitted for electric operation.

€ 11,90



   

Art. No.: 61120

Adapter track G100
Adapter track G100 between geoLine tracks and ROCO LINE tracks, length: 100 mm.

€ 3,20



   

Art. No.: 61122

Curved track R2
Curved track R2
30°, radius = 358 mm.

€ 2,90



   

Art. No.: 61123

Curved track R3
Curved track R3
Radius: r = 434,5 mm/30°

€ 2,90



   

Art. No.: 61124

Curved track R4
Curved track R4
Radius: r = 511,1 mm/30°

€ 3,60



   

Art. No.: 61128

Curved track GB2
Curved track GB2. Radius 502.7 mm.

Opposite curve for straight turnouts, threeway-turnout and double-slip.

€ 3,00



   

Art. No.: 61129

Curved track R2, 7.5°
Curved track R2, 7.5°, radius = 358 mm.

€ 3,20



   

Art. No.: 61130

Curved track R3
Curved track R3, 7.5°, radius = 434.5 mm.

€ 3,20



   

Art. No.: 61140

Turnout, left
Manual turnout, Length 200 mm (= length of standard tracks).

Branch radius 502.7 mm, branch angle, 22.5°.

€ 22,00



   

Art. No.: 61141

Turnout, right
Turnout right, length: 200 mm (= Length of standard track).

Branch angle 22,5°, branch radius 502,7 mm

€ 22,00



   

Art. No.: 61150

geoLine Track set A1
geoLine Track set A1

Contents: 4x straight tracks G200, 1x manual turnout, left, 1x buffer stop kit,
1 pack roadbed end pieces. Space required: approx. 210 x 90 cm

€ 29,90



   

Art. No.: 61151

geoLine Track set B1
geoLine Track set B1

Contents: 2x straight tracks G200, 4x straight tracks G185, 2x curved tracks GB2, 1x manual turnout, left, 1x manual turnout, right. Space required: approx. 250 x 90 cm

€ 49,90



   

Art. No.: 61152

geoLine Track set C1
geoLine Track set C1

Contents: 6x straight tracks G200, 3x straight tracks G185, 2x curved tracks R3, 1x manual curved turnout, left, 1x manual curved turnout, right. Space required: approx. 230 x 100 cm

€ 69,90



   

Art. No.: 61154

Curved turnout left R 3/4,
Curved turnout left R 3/4, 30°, radius of the main track and the branch line 434,5 mm.

€ 34,00



   

Art. No.: 61155

Curved turnout right R 3/4
Curved turnout right R 3/4, 30°, radius of the main track and the branch line 434,5 mm.

€ 34,00



   

Art. No.: 61160

Three-way turnout
Three-way turnout, length 200 mm (= length of standard track), branch angle 22,5° each, symmetrical.

€ 46,90



   

Art. No.: 61164

Double slip
Double slip, 22,5°, length 200 mm (= length of standard track).

€ 49,90



   

Art. No.: 61180

Track end piece
Roadbed end piece.

To finish of the roadbeds properly in the case of track bumpers, display case track etc.

Content: 6 units/pack.

€ 7,20



   

Art. No.: 61181

Rail damping element

€ 7,90



   

Art. No.: 61183

Set of sleeper end pieces
Set of sleeper end pieces for flex track 61106.

Used to equalise differences in length of the flex track 61106.

Content: 6 end pieces, 12 rail joiners, 1 universal tool.

€ 12,60



   

Art. No.: 61190

Feed-in power element for digital DCC operation
Feed-in power element for digital DCC operation.

It can be connected to any straight or curved track at a point defi ned in the factory.

€ 5,90



   

Art. No.: 61191

Feed-in power element for analogue DC operation
Feed-in power element for analogue DC operation.

It can be connected to any straight or curved track at a point defined in the factory. Not suitable for digital operation.

€ 5,90



   

Art. No.: 61192

Insulated rail connector with general purpose tool
Insulated rail connector with general purpose tool.

Content: 28 units/pack – can also be used for other track systems.

€ 4,60



   

Art. No.: 61193

Reed contact in plastic casing for geoLine tracks
With fault clearance to avoid switching spikes and with buffer protection. With all geoLine tracks, this potential-free switch contact can be fitted in the places intended for it. Operated by magnet 42256. Can also be used as feedback-momentary contact along with feedback module 10787 or detector 10808.

€ 9,60



   

Art. No.: 61195

General purpose turnout mechanism
geoLine general purpose turnout mechanism to convert each geoLine turnout from manual operation to electrical operation.

Suitable for turnout decoder 61196.

€ 22,40



   

Art. No.: 61196

Turnout decoder geoLine
Suitable for the turnout drive 61195 of the geoLine track system. Accessible via turnout addresses 1 to 1024. Decoder characteristics can be changed via CVs.

■ Easy assembling
■ Simple operation
■ Safeguarded against overheating and short-circuit fault

NOTE: No longer accessible via locomotive addresses!

€ 28,40



  

Art. No.: 61197

Uncoupler decoder geoLine
For the retrofitting of the uncoupling tracks 61118 for digital operation. Protected housing inside the bedding body. Switch addresses can be assigned from 1 to 1024.

■ With short circuit protection

€ 42,90



 

Art. No.: 81397



€ 9,95