Products


 

Art. No.: 10775

Turnout decoder DCC (8 outputs)
The turnout decoder can switch up to eight turnouts or eight solenoid-operated articles. If light signals are used, one needs one double-spool relay (Item no.: 10019) per signal. All outputs are short-circuit proof. Overall, the decoder can be loaded with up to 2 A; this also applies to every single connection for the period of one second! The address range is between 1 and 256. The connection is made with two cables onto the two rail profiles.
If a high output is required, of course it is possible to create one’s own supply network, which is supplied out of a booster of its own.
There is a special solution for operating 10775 with the Lokmaus® 2/3. In this case the decoder can be programmed onto the locomotive address and four turnouts created by means of functions F1 to F4. Anyone using a multiMAUS or a RouteControl at a later date, can then use all eight turnout outputs again. We supply our turnout decoder in the standardized DCC system. Here, too there is a variant for the Märklin*-Motorola** format (art. no. 10776) which naturally implies that the Lokmaus® function had to be dispensed with.

* Märklin is a registered trademark of Gebr. Märklin & Cie. GmbH Göppingen, DE
** Motorola is a registered trademark of Motorola Inc., Schaumburg, Illinois, US

€ 84,00



 

Art. No.: 10777

Signal module
The signal module has 2 separate connections for two light signals with maximum 4 signal terms each. 2 addresses are saved in the system for every connection, thus 4 addresses for every signal module.
Signals can be connected with lamps as well as with LED. Integrated logic switching for automatic block post operation. In combination with the brake generator (10779), automatic switch-over to a brake signal is possible.

Connections:
■ 2x separate connections for signal stop section
■ 1x input for power supply of the digital system (10761, 10762, 10764, 10765, 10820, 10822, 10805, 10806, 10807)
■ 1x input for power supply of the brake generator 10779
■ 2x separate connections for 3 track contacts/circuit tracks each
All connections are short-circuit-safe.

Contents:
■ Signal module
■ 2 piece 8-pole connectors
■ 2 piece 3-pole connectors
■ Manual

€ 133,00



 

Art. No.: 10885

6-pin decoder, straight pins (NEM 651)
Suitable for Gauge H0, TT and N. The decoder is equipped with the RailCom® function.
Maximum motor current: 1.0 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 39,40



  

Art. No.: 10890

8-pole sound decoder (NEM 652)
Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom® function.
Maximum motor current: 1.2 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 94,00



  

Art. No.: 10891

PluX22 sound decoder (NEM 658)
Suitable for Gauge H0. The decoder is equipped with the RailCom® function.
Maximum motor current: 1.2 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 89,00



  

Art. No.: 10892

8-pole sound decoder (NEM 652)
Sound decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom® function.
Maximum motor current: 0.8 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 104,00



  

Art. No.: 10893

PluX16 sound decoder (NEM 658)
Suitable for Gauge H0 and TT. Decoder is equipped with the RailCom® function.
Maximum motor current: 0.8 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 99,00



  

Art. No.: 10894

8-pole decoder (NEM 652)
Decoder with wires and 8-pole plug. Suitable for Gauge H0. The decoder is equipped with the RailCom® function.
Maximum motor current: 1.0 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 35,00



 

Art. No.: 10895

PluX16 decoder (NEM 658)
Suitable for Gauge H0 and TT. The decoder is equipped with the RailCom® function.
Maximum motor current: 1.0 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 32,00



  

Art. No.: 10896

PluX22 decoder (NEM 658)
Suitable for Gauge H0. The decoder is equipped with the RailCom® function.
Maximum motor current: 1.2 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 42,00



  

Art. No.: 40411

Digital coupler installation kit (NEM 652)
Digital coupler installation kit consists of 2 couplers and an 8-pin decoder with cable and plug. The decoder is equipped with the RailCom® function.
Maximum motor current: 1.0 A.

The couplers can only be controlled correctly with this decoder, using other decoders can lead to damage of the couplers.

For further technical specification, see the spec sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 94,00



 

Art. No.: 685101

NEXT18-decoder (NEM 662)
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom® function.
Maximum motor current: 0.7 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 27,00



 

Art. No.: 685602

NEXT18-sound decoder (NEM 662)
Suitable for Gauge TT and N. The decoder is equipped with the RailCom® function.
Maximum motor current: 0.8 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 89,00



 

Art. No.: 686101

6-pin decoder, straight pins (NEM 651)
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom® function.
Maximum motor current: 0.8 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 32,00



 

Art. No.: 686201

8-pole decoder (NEM 652)
Decoder with wires and 8-pole plug. Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom® function.
Maximum motor current: 0.8 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 35,00



 

Art. No.: 687701

6-pin miniature sound decoder (NEM 651)
Suitable for Gauge H0e, TT and N. The decoder is equipped with the RailCom® function.
Maximum motor current: 0.7 A.

For further technical data see data sheet. (Downloads)

RailCom is a registered trademark of the Lenz GmbH, Gießen.

€ 99,00